The Models 9032 and 9033
pressure standards measure pressure to an accuracy of ± 0.01% FS. Models
9034 and
9038 are pressure calibrators with accuracies up to ± 0.01% FS.
Available
in absolute and differential versions, these
products interface to the NetScanner™ System via industry standard Ethernet
TCP/IP networking, and provide
accurate measurement and stable control of dry non-corrosive gases. The barometer
complements the easy to use
NetScanner™ System for acquisition of multiple pressures. The calibrators
can be used to input known pressures
to the NetScanner™ System, or any pressure measurement device that requires
periodic calibration.
Pressure data is output in engineering units via a digital Ethernet
interface. The host computer interface is
accomplished via networkable Ethernet connection using TCP/IP communications
protocol.
|
Commercially available
networking hardware or Pressure Systems pressure scanning hardware will
easily
integrate these products to your
computer.
An internal 32-bit
microprocessor in each NetScanner component corrects for zero, span
and non–linearity errors of
the internal pressure standard. It also performs digital temperature compensation
for the standard to reduce thermal
errors to less than ± 0.001% FS/EC.
The pressure standards and pressure controllers are part of the Pressure
Systems’ NetScanner™ System
for
multipoint pressure acquisition. Other networkable components of this system
solution include rack mount and standalone
pneumatic pressure scanners as well as liquid pressure scanners with pressure
ranges up to 10,000 psi. |
